High quality and durable: the VAICO intake manifold modules
Practice-orientated solution: For the first time on the independent aftermarket, VAICO presents a sophisticated further development of the intake manifold modules to match the OE solution. With the integrated adjusting element, the new references correspond to the original equipment design as a complete module. Now exclusively and cleverly available as EXPERT KITS+.
Available languages:
What is an Intake Manifold Module?
The intake manifold module is also known by the term inlet manifold, less often it is also called intake spider. The intake manifold module with changeover flaps (swirl flaps) ensures that the incoming fresh air can enter the combustion chamber in a controlled rotary movement and thus achieve a better mixture of fuel and air. This has a positive influence on the emissions and fuel consumption of the engine.
| Intake Manifold Module |
Suitable for: A3, 4,5,6, Q5, Eos, Passat, Tiguan
| X-Ref: | 03L 129 711 AG | V10-5269 |
By loading the video, you agree to YouTube's privacy policy.
Learn more
Advantages of the VAICO EXPERT KITS+ intake manifold modules
VAICO offers high-quality intake manifold modules for the most common applications. VAICO’s parts experts have developed a customised complete solution by liaising with workshops and practitioners: The VAICO EXPERT KITS+ intake manifold modules offer customer-orientated repair solutions that guarantee maximum customer satisfaction. They contain all the necessary components such as screws, seals, sensors and actuators. The modules are pre-assembled, synchronised and subjected to a complete quality check on site by VIEROL quality management. This includes heat resistance, pressure tests and a 100% functional check. This thorough preparation ensures that the complete intake module can be synchronised with the vehicle’s engine management system without any problems.
The complete module, including the adjusting element, is supplied ready for installation, eliminating frequent installation errors. Workshops can install the components efficiently and quickly in accordance with the manufacturer’s specifications. The EXPERT KITS+ also impress with their performance: original components, state-of-the-art diagnostic systems and the use of high-quality PA6 GF35 and PA6 FG30 plastic guarantee durability, flexibility, high toughness and excellent wear behaviour. This provides workshops with a high-quality solution at original equipment level that saves both time and money.
Did you know?
Heavy soiling of the intake manifold module makes the actuator difficult to move and prevents it from opening or closing completely. As a result of the continuous operation in these conditions, the servomotor may be damaged and must replaced. Unfortunately, the manufacturer’s self-diagnosis does not check the servomotor and always issues a fault on the intake manifold module. Even if only the actuator motor is defective, an error code is output to the suction pipe module.
 |
Symptoms❌ After replacement of the intake manifold module, the engine does not deliver full power. |
 |
Failure causes❌ Due to old, stiff or jammed intake manifold module, the servomotor was damaged and no longer reaches the required end positions.. |
 |
Recommended by the experts✔️ Carefully check the servomotor before installing the new intake manifold module. Intake manifold module: V10-3948 / Servomotor: V10-77-0024 |
Video: Intake manifold module removal and installation using the example of a VW Tiguan 2.0 TDI
By loading the video, you agree to YouTube's privacy policy.
Learn more
